Other Engineering Services

Study and evaluation of the Seawater intake structural strength of the Persian Gulf special zone in order to install the crane of south Kaveh steel Co

Start date of the project: 2019/ January/ 10
South Kaveh Steel Co is one of the greatest investments of the Mostazafan Foundation of Islamic Revolution in the steel industry. This company was made in 2007 in the PGMISEZ on a 170 hectares area in Bandar Abbas.
This company wanted to install a gantry crane on the seawater intake wall in order to install its facilities at the pumping station. The pumping station structure was built about 20 years ago. This structure is damaged during its useful life due to corrosion and other factors. Furthermore, new facilities are installed on it during this period, which applied significant additional loads on the Seawater intake structure. Therefore, the feasibility study should be done on the structural strength of Seawater intake. In this regard, Study and evaluation of the Seawater intake structural strength is entrusted to the Tadvin Tosehe Paydar engineering Company.
The engineering services in this project are expressed as follow:
1- Preparing the visual inspection of the seawater intake structure to identify the damage location.
2- Data acquisition and preparing the plans such as the crane installation site
3- Diving and photography of the piles of the seawater intake structure.
4- Simulation of existing structures by Sap 2000 software by considering additional loads on the structure and corrosion effect to determine the strength and stability of structure.

Feasibility study on constructing the special jetty of south Kaveh Steel

Start date of the project: 2019/ January/ 10
South Kaveh Steel Co is one of the greatest investments of the Mostazafan Foundation of Islamic Revolution in the steel industry. This company is made in 2007 in the PGMISEZ on a 170 hectares area in Bandar Abbas.
The goal of this project is to reduce the cost of export by constructing the special jetty in the PGMISEZ. Feasibility study on constricting this jetty is entrusted to the Tadnin Tosehe Paydar engineering Company.
The engineering services in this project are expressed as follow:
1. Providing the special inspection of the project site
2. Collecting the project requirements and predicting the required jetty capacity
3. Collecting all geotechnical data, climatic conditions and hydrography
4. Expertize examination and presenting the different option for locating the access bridge and special jetty.
5. Preparing the plans and calculating the required dredging for the construction of the new jetty.
6. Estimating the implementation costs include purchasing, transportation, construction and installation of access bridge and jetty, piping, mechanical, electrical and other facilities.
7. Estimating the costs of construction, maintenance, operation of the jetty and required credits for the implementation of the development plan
8. Estimating the unloading and loading costs to ships in Shahid Rajaee port and Persian Gulf special zone.

Investigation of the structural strengh of the water pumping station of the PGMISEZ in order to install the water hammer control tanks of the South Kaveh Steel Co

Start date of the project: 17/ November / 2018
South Kaveh Steel Co is one of the greatest investments of the Mostazafan Foundation of Islamic Revolution in the steel industry. This company is made in 2007 in the PGMISEZ on a 170 hectares area in Bandar Abbas.
This company uses two water pumps in the Persian Gulf special zone water intake to supply the required water for its facilities. This company should install 3 water hammer control tanks on water pumping station by considering South Kaveh Steel Company requirements. Each of these tanks weighs about 46 tons. This water intake made 20 years ago. In this regard, studies and evaluations related to the strength of water intake structures are entrusted to the Tadvin Tosehe Paydar engineering Company.
The engineering services in this project are expressed as follow:
1- Performing a visual inspection of the water intake structure and the location of the tanks.
2- Collecting existing information and drawing.
3- Simulating existing structure by considering additional new loads, including power supply, new gantry cranes and the water hammer control tank and existing structures situation (corrosion and degradation).
4- Locating the water hammer control tank on the water intake structure if needed.
5- Providing a repairing and reinforcement plan for the water intake structure if needed.

Providing Engineering and Supervision Services for the Development of Marine Infrastructure and Gulf Region Special Transportation System

Start date of the project: 22/May/2018
The Persian Gulf Special Zone Company gives the engineering and consulting services about developing and improve its marine infrastructure and material transfer automatic system to Tadvin Tosehe Paydar engineering Company.
The engineering services in this project are expressed as follow:
1- Providing supervision services and review and check the technical documentation of Banegostar karaneh (land and jetty parts)
2- Updating the tender documentation of the Southern Wagon unloading Meeting and supreme and Site supervision, if needed.
3- Feasibility study to increase the take up length of C15 line under the tower 8, and supreme and Site supervision, if needed
4- Updating and modifying the tender documentation of the jetty and access bridge repairing as well as supreme and Site supervision, if needed.

Providing the designing control services for the Phase one of Bandar Abbas oil terminal

Start date of the project: 2015/ October/ 23
Constriction contract of the Bandar Abbas oil terminal at Shahid Rajaii port was given to Steam Company. Tadvin Tosehe Paydar Engineering Company were consulting of Steam Company in this project. Summarize of the task of this Company are expressed as follow:
• Design review
•Value Engineering
•Engineering services

Consulting service consists of tender for repairing and equipping of Kaveh Qeshm port, supreme and Site supervision

Start date of the project: 25/May/2013
The engineering services in this project are expressed as follow:
1- Carrying out tender ceremonies consist of a written answer to questions and technical ambiguities of tender applicants and proposing required explanatory information, carrying out an inspection for tender applicants from the place of project Site and proposing required explanations, attending to the tenders committee in order to the applicants technical and financial assessment, selecting the best suggestion and introduce tender winner.
2- Providing engineering services include locating the facilities and edible oil in the Kaveh Qeshm port, locating the construction vessels place, locating refrigerating room for the maintenance of materials.
3- Supreme and operative supervision and equipping Kaveh Qeshm jetty